Dual caliper handbrake kit for KTM, Husqvarna, Gasgas, Stark

Dual caliper handbrake kit for KTM, Husqvarna, Gasgas, Stark

Interchangeable 20mm and 22mm sleeves for the caliper bracket means these fit almost all KTM, Husqvarna, Gasgas and Stark models

Contains everything you need to install the dual caliper handbrake;

NiceCNC dual caliper bracket with brake disc protection

Genuine Brembo 2 piston brake caliper

Accossato black 16mm radial master cylinder with reservoir

Goodridge braided 2m brake line with stainless fittings, one straight and one swivel fitting for easy fitment

Includes 2 banjo bolts and crush washers, bolts to mount the second caliper to the bracket, reservoir hose and clamps

NOTE: MUST use the supplied disc bolts on your rear brake disc so the caliper has enough clearance

This is a retrofit kit, you will need to adjust the position of the clutch master cylinder and lever, we recommend the NiceCNC clutch lever for Brembo clutch master cylinders

Route the brake line away from the exhaust pipe and engine where possible, use zip ties to secure to the original rear brake line and out of the way of the exhaust and engine. Make sure there is enough room for the line to move when the handlebars are turned either side and the brake line does not rub or pinch components

We cannot be liable for incorrect fitting and issues caused by incorrect fitting